|
仕様概略 |
| 製品名 |
FLASH2
|
FLASHMATE5V1 |
| Supported
CPU |
Flash
On-Chip Memory made by Renesas Technology Corp of single power
supply and Expanded memory of H8SX/1650. |
| Writable
file format |
Motorola
file (S format) extension .MOT |
| Writing
mode |
Only
for Boot Mode Programming |
| Writing
method |
For
Online
Support by the control software
|
For
Online and Offline
Support
by the control software. Support
by only switch of main body.
|
|
Selection of
sources |
◆Select
local files in PC
◆For
secondary files
（User
boot mat） |
◆Selection
of various sources
…Local
files in PC/Files finished upload/Writing from ROM socket.
◆For
secondary files （EEPROM ・User boot mat）
|
|
Selection of
communication |
By
asynchronous communication |
High-speed
writing by asynchronous communication and clock
synchronous communication (Greatest set point 600Kbps） |
|
Option I/F |
Writing
of M8C・R16C series by
I/F of 10P・14P.
…Writing
by conversion
board
（An
option is necessary）.
|
◆Writing
of 14P on-chip emulation
I/F. Optional
： OE
conversion cable\2,000 ◆Writing
is possible by LILAC-T
and I/F（14P）
for E7・E8. ◆Writing
of M8C・R16C series by I/F
of 10P・14P.
…Writing by conversion
board （An option is necessary）.
|
|
Added
CPU （charged） |
Upgrading
the control software |
Version
up of firmware in writer.
※Updating of firmware can be
supported by attached control software. |
|
Parameter |
When
this control software is closed , all the parameters are save
in the system. |
When
this control soft ware is closed , all the parameters are save
in the system. |
|
Others |
◆Log
files can be stored in PC.◆Display of checksum value.（
Only when the checksum and the verify is selected , the
display is 8 bit.） |
| Writing
voltage in the target |
5V
or 3.3V (voltage span for UserVcc:2.5〜5.5V Consumption
current: about 10mA) |
| Main
body internal memory |
-
|
Flash 1.5MB
,Attached parameter. It is possible to upload some user's
files. |
| PC
I/F |
RS232C Connector：DSUB25P ※The
straight cable is required for the connection. |
| Target
I/F |
TTL
level Side of main body is equipped FL20A2MA. Attached
target cable：30cm in length , finished with arrival at FL20A2FO（Oki Electric Cable Company）.
|
| Power
supply /Body case size |
Attached
AC adapter or 2 alkaline drycells(LR6/1.5 volt). / Body Case
Size：89×134×36mm |
|
Weight |
180g |
260g |
|
For
factory mass production use
|
F2DLL：\25,000
DLL
and sample that can set and write in user's applications.
※Supported
CPU are limited. |
signal
input and output option ※See
the price down page
Switches
of the main body can be changed to the connector , and it be
used in the custom specification farm.
|
|
Optional |
-
|
CHANGER8
\186,800
※Please
use it together with FLASHMATE5V1（With
signal input and output option ).
 |
・Set
price：\186,800
・Adaptation
of FLASHMATE5V1：\25,000
Manual
PDF
Products
guide
PDF |
|
| 共通仕様 |
◆Operation
environment･･･Windows95・98・Me・2000・XPJapanese
environment ◆The
screen mark can be selected Japanese or English.
◆The
AC adaptor is restricted only for Japanese domestic use. ◆Programmer
I/F Circuit Diagram. ◆About
making of the target board. |
| Contents |
・Programmer ・CD（Control
software/Demo software/Manuals） ・AC
adapter ・Target cable
|
